Computer Prototyping

Makerspace has computer prototyping kits available to checkout using your TID card. View the full list of Arduino and Raspberry Pi items on this page, or view a full list of Makerspace’s lendable equipment.

  • 1x Arduino Uno R3 Board
  • 1x Arduino MKR WIFI 1010
  • 1x Arduino MKR Connector Carrier
  • 1x Arduino Breadboard
  • 1x DC Motor + Sprockets
  • 1x Servo Motor + Sprockets
  • 1x LCD Display
  • 1x Adafruit Wave Shield Audio kit
    • 1x Speaker (1W, 8-Ohms)
    • 1x SD Card
  • 1x Electronic Components kit
    • Assorted Resistors
    • Assorted Capacitors
    • Assorted LEDs (Red, Green, Blue, Yellow, White + Colour Gels)
    • Assorted Diodes
    • Assorted Jumper Wires
    • Assorted Male Header Pins
    • 2x Optocouplers
    • 3x Potentiometers
    • 11x Pushbuttons
    • 6x Photo Transistors
    • 1x Tilt Sensor
    • 1x Piezo
    • 1x variable control dial
    • 1x DC Input Jack (female)
    • 2x Temperature Sensors
    • 5x Transistors (small)
    • 2x Transistors (large)
    • 1x Battery Snap (9v)
    • 1x H-Bridge
  • 1x USB Cable (USB type B male to USB Type A Male)
  • 1x Micro-USB to USB type A Cable
  • 1x Project Book
  • 1x Arduino Uno R3 Board
  • 1x Arduino Breadboard
  • 1x DC Motor + Sprockets
  • 1x Servo Motor + Sprockets
  • 1x LCD Display
  • 1x Electronic Components kit
    • Assorted Resistors
    • Assorted Capacitors
    • Assorted LEDs (Red, Green, Blue, Yellow, White + Colour Gels)
    • Assorted Diodes
    • Assorted Jumper Wires
    • Assorted Male Header Pins
    • 2x Optocouplers
    • 10x Push Buttons
    • 6x Photo Transistors
    • 3x Potentiometers
    • 5x Transistors (small)
    • 2x Transistors (large)
    • 1x Piezo
    • 1x Temperature Sensor
    • 1x Tilt Sensor
    • 1x H-Bridge
    • 1x Battery Snap (9V)
  • 1x USB Cable (USB type B male to USB Type A Male)
  • 1x Project Book
  • 1x Arduino Uno
    • 1x Arduino Breadboard
    • 1x DC Motor + Sprockets
    • 1x Servo Motor + Sprockets
    • 1x LCD Display
    • 1x Electronic Components kit
      • Assorted Resistors
      • Assorted Capacitors
      • Assorted LEDs (Red, Green, Blue, Yellow, White + Colour Gels)
      • Assorted Diodes
      • Assorted Jumper Wires
      • Assorted Male Header Pins
      • 2x Optocouplers
      • 10x Push Buttons
      • 6x Photo Transistors
      • 3x Potentiometers
      • 5x Transistors (small)
      • 2x Transistors (large)
      • 1x Piezo
      • 1x Temperature Sensor
      • 1x Tilt Sensor
      • 1x H-Bridge
      • 1x Battery Snap (9V)
    • 1x USB Cable (USB type B male to USB Type A Male)
    • 1x Project Book
  • Raspberry Pi 4 4GB
  • Mouse
  • Keyboard
  • 2x HDMI cables
  • Power Supply
  • Beginner’s guidebook
  • SD Card
  • Raspberry pi 400 computer (built-in keyboard)
  • Mouse
  • HDMI Cable
  • Power supply
  • SD Card
  • Raspberry Pi Zero
  • HDMI Cable adaptor
  • USB adaptor dongle
  • Power Supply
  • SD Card
  • 2x Raspberry Pi 4 4GB
  • Power supplies
  • 4x Raspberry Pi Pico

LED/Light Kits/Parts:

  • 1x “Blinkt!” eight-LED RGB indicators
  • 2x “Unicorn Hat mini” RGB LED matrix – programmable
  • 2x “Bright Pi v1.0” White LED and IR Camera Light for Raspberry Pi
  • 2x Semi Sphere LED parts
  • 1x LED RGB Light Strip
  • 4x Jumper Lead Cables
  • 1x Data Ribbon Cable

Prototyping

  • 2x “ModMyPi’s” Proto Plate – For adding additional hats/sensors
  • 1x “Explorer Hat Pro” – Multifunctional prototyping board
  • 4x Monk Makes Raspberry Pi Project Boxes

Sensors

  • 2x “Raspberry Pi official Sense Hats” – multisensory add-on board
  • 1x “Skywriter” electrical near field 3D/gesture Sensor

Cameras

  • 2x Raspberry Pi High-Quality Cameras
  • 1x Waveshare Thermal Camera
  • 1x Raspberry Pi Camera v1.3
  • 1x Raspberry Pi Camera v2.1
  • 2x 16mm 5MP CCTV lens
  • 1x 6mm 3MP CCTV Lens
  • 2x Data Ribbon Cable

Weather/Environment

  • 1x Pimoroni Enviro Indoor monitor
  • 2x Pimoroni Enviro + Air Quality monitor
  • 2x PM2.5 Air Quality sensor
  • 1x SEEED Grove – dust sensor
  • 1x SEEED Grove – Air Quality sensor

Display

  • 1x Raspberry Pi Official v1.1 Display – 7” screen
  • 1x SEEED Grove – 0.96” OLED Display

Arduino Walkthrough

The basics of using the Arduino system.

Afrotechmods

Raspberry Pi Walkthrough

Everything you need to know about what a Raspberry Pi is and its capabilities!

Maker Tutor