3D Print Your Favourite Geography
| | |

3D Print Your Favourite Geography

If you are new to 3D printing and all the software that is used within this write up, there is a video attached at the end that is meant to help you through all the steps. I would recommend reading this post first and then watch the video. With the write up and video, you should be able to 3D print your own landscape model in no time!

3D Printing a Guitar
|

3D Printing a Guitar

Post by Joey DaCosta If you spend time simultaneously inhabiting online guitar-nerd and maker communities you’ll probably come across this project at some point: https://blog.prusa3d.com/the-prusacaster-how-to-design-and-3d-print-an-electric-guitar_71962/ Here’s a picture of the project from the Prusa blog…

3D Print in 2 Colours

3D Print in 2 Colours

Makerspace has 4 Ultimaker 3D printers. These printers have 2 extruders on them, which means each extruder can have a different colour. This allows users to create designs that can have multiple colours in them! If you would like to learn how to print objects with 2 colours follow the steps below! We will be using Tinkercad for this project and it will be based on the identity token project all new users have to create.

Become a Makerspace Student Ambassador! (Now Closed)

Become a Makerspace Student Ambassador! (Now Closed)

The TRU Library Makerspace is looking for 5 Makerspace Student Ambassadors for Fall 2022! Makerspace Ambassadors will work in the Makerspace providing orientations, tours, and helping users. Knowledge of Makerspace technologies isn’t required but enthusiasm about supporting hands-on learning and exploration is a must!